Maintenance
Write Configuration Data to Device
TTo write configuration parameters to the VBrick from an .xml file:
1.Click the Browse button and navigate to the configuration file you want to write to the appliance.
2.Click on the Write button to write the selected file to the VBrick. The configuration parameters will be saved to Flash memory and the appliance will reboot. In the event of a validation error, a message will appear on the screen. Click on Errors to view error messages that might have caused the validation failure.
TTo create a configuration file:
1.Read the configuration from the VBrick and save as an .xml file. See Read Configuration Data from Device above.
2.Use any text editor, preferably an .xml editor to make changes to the file. You can change the "values" field as well as delete objects as necessary. Make sure the right data types are used. For example if a parameter takes integer values, do not enter a string. Also IP Address parameters must have the right IP syntax. Enter "0.0.0.0" to enter a null IP address. Blanks and null strings are not valid IP Addresses.
Maintenance: Change Usernames & Passwords
Maintenance: Usernames & Passwords > Change Usernames & Passwords
This page lets an Administrator change usernames and passwords for security purposes.
VBrick | 91 |
