VBrick Systems VB4000, VB6000, VB5000 manual Number, Event Description

			MPEG-2 Configuration
	SNMP Trap Version		Select Version number.
	Trap User Name		User assigned trap name.
	Authentication Password		Enter password. Cannot exceed 20 characters. May include any
			combination of alphanumeric characters but only the following
			special characters: ~ ! # $ ^ * + & % [ ] { } < > See Table 5 on
			page 93 for defaults.
	Authentication Protocol		Select protocol: MD5 or SHA to validate the transaction
			between a given host and client
	Privacy Password		Required. Hides traffic using DES encryption.
	Security Level		No Authentication, No Privacy (default).
			No Privacy.
			Authentication and Privacy.
	Table 4. Trap Summary Tables
	Number	Event Description
1		There is loss of video input on slot1 Encoder.
2		The loss of video input on slot1 Encoder failure has cleared.
3		There is loss of video input on slot2 Encoder.
4		The loss of video input on slot2 Encoder failure has cleared.
5		The box has started up in Run mode.
6		The box has started up in Diagnostics mode.
7		The box has started up in Limited Run mode.
8		The box has received a reset request from an administrator.
9		There is a fan failure.
10		The fan failure is recovered.
11		The temperature of the unit is out of range. Will be sent when the unit's internal
		temperature becomes too high or too low.
12		The temperature out of range condition has cleared.
13		The 24 volts power supply failed.
14		The 24 volts power supply failure has cleared.
15		The 12 volts power supply failed.
16		The 12 volts power supply failure has cleared.
17		The 5 volts power supply failed.
18		The 5 volts power supply failure has cleared.
19		The 3.3 volts power supply failed.
20		The 3.3 volts power supply failure has cleared.
21		The 2.5 volts power supply failed.

VBrick MPEG-2 Appliance Admin Guide 47