VBrick Systems VB6000, VB4000, VB5000 manual VBStar Status, FTP Queue Operation

VBStar

Last Queue Operation

File added OK; or File removed OK; or blank.

FTP Queue Operation

Changes to the entries on the screen d not take effect until you select an action button (Add

to FTP Queue, Remove from FTP Queue or Flush Queue).

Directory	The target directory located on the server. See notes under sending to
	VBrick and non-VBrick appliances in the previous IWS screen.
File	Name of the File from the hard drive.
Batch	The batch filename of an individually indexed batch file. If a whole
	batch is to be FTPed, File should be set to the base name of that
	batch and this object is to be set to Entire Batch.
Destination	The server to which the file or files is to be transferred. Servers are
	configured in the Servers section of the same page.
Add to FTP Queue	Adds the selected file or the batch of files, as indicated by to the FTP
	file and Batch drop-down box. FTP transfer starts immediately after
	operation.
Remove from FTP	Allow the file to be removed from the FTP transfer queue.
Queue
Flush Queue	Removes all the current files from FTP transfer queue. It also makes
	any changes made to the variables of this group operational before
	performing this flush action, so that the values of variables in this
	group represent the actual values used by the VBrick.

VBStar Status

For a description of VBStar Status screens, see Status: Hard Drive Status on page 69.

VBrick MPEG-2 Appliance Admin Guide 115