VBrick Systems VB4000, VB6000, VB5000 manual Conferencing

Conferencing	This option enables/disables the ability of a user to initiate a
Setup	conference using an IR remote control unit. Disabled prevents this
	VBrick from appearing on the Conference Guide of other VBricks.
Conferencing	If Manual, the called party on this VBrick must explicitly accept the
Accept	call with the IR remote control. If automatic, the call will be accepted
	without any action on the part of the called party.
Local Ringer	Used to enable/disable the ringer.
Conference End	Allows the choice of what is displayed when the conference ends.
Display Mode	Display either Picture-in-Picture (with the local encoder view) or a
	Blank Screen.
Local Ringer IR	If Enabled, the ringer may be enabled or disabled via the IR remote by
	the user (operator) of this VBrick. If disabled, the local operator
	cannot change the state of the ringer. It will remain as set above in
	"local ringer".
Conferencing	Used to configure the name of the user (operator) of this VBrick. This
Name	is the name, which will appear on the conference guide screen used to
	set up the conference. The default entry is \h or \H, which identifies
	the unit by the Host Name of VBrick appliance.
SAP IP Address	The SAPs for Conference Call setup are sent to this destination IP
	Address.
SAP Port	The SAPs for Conference Call setup are sent to this destination IP/
	UDP port.
SAP Retransmit	Allows setting the SAP retransmit time.
Time

38 © 2007 VBrick Systems, Inc.