VBrick Systems VB6000, VB4000, VB5000 manual Passthrough State Responder

Operational State	Describes the current status of a Passthrough connection, including
	error conditions, if any. Refer to the Network Status Section. This will
	display "Active" if in Passthrough mode.
COM Interface	Describes the COM interface connector. (RS422/485 options are
Type	displayed only if main board has a Part Number ending in xxx3. See
	Status: User Information > Main Board.)
	• RS232 – standard RS-232 serial port connector.
	• RS422/485 – RS-422/485 4-wire serial port connector.
	• RS422/485 (Terminated) – RS-422/485 terminated.

Passthrough State: Responder

Baud Rate	Rate can be set to the following (Default = 9600): 110, 300, 600, 1200,
	2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600,
	115200.
Stop Bits	Number of stop bits for Passthrough port (1 or 2).
Parity	None, Even, Odd.
RTS Control	Force Off, Force On or Automatic. If automatic, the control will be
	on when Passthrough is active. DTR and RTS are available for COM2
	only for those VBrick models whose last digit is 3 or higher. Under no
	conditions are RTS or DTR controls passed through end-to-end. All
	control handling is local.
DTR Control	Force Off, Force On or Automatic. If automatic, the control will be
	On when Passthrough is active. See note above.
Operational State	Describes the current status of a Passthrough connection, including
	error conditions, if any. Refer to the Network Status Section. This will
	display "Active" if in Passthrough mode.

40 © 2007 VBrick Systems, Inc.