VBrick Systems VB6000, VB4000, VB5000 manual Configuration Decoder Audio

MPEG-2 Configuration

Actual PID

Actual PID being played. This read-only parameter is of interest when the user selects automatic. A value of 8191 indicates the PID has not yet been established.

Configuration: Decoder > Audio

The audio selection provides for the control and configuration of the decoded audio stream.

Output Mode	The audio output mode can be one of five possible setting as shown
	below. Stereo directs the incoming left audio channel to the left
	output, and the incoming right audio channel to the right output. Mix
	combines the left and right audio channels and directs the combined
	output to both the left and right audio channels. Left selects the input
	left audio channel and sends it to both the left and right output
	channels. Right selects the input right audio channel and sends it to
	both the left and right output channels. Mute suppresses audio
	output. The Dual to options are only operational on an input stream
	that was encoded in Dual audio mode; otherwise, the Output Mode is
	determined by the corresponding audio encoder setting.
	•	Dual to Stereo
	•	Dual to Mix
	•	Dual to Left
	•	Dual to Right
	•	Mute
Output Level	Hardware-dependent; not shown on all models. Changes the range of
	values for Left and Right Gain.
	Normal – 14 dB to -48 dB (+14 to -48 on some decoder models).
	Alternate – 8 dB to -54 dB (+14 to -48 on some decoder models).
Left Gain	Used to adjust volume. Default = 0.

VBrick MPEG-2 Appliance Admin Guide 19