VBrick Systems VB6000, VB4000, VB5000 manual Announce Common Information

Announce Common Information

Program Name	The string providing the name of the stream associated with this
	SAP. This SAP text shows up in the Program Guide for other
	VBrick products. Default is \H Program x (where x is 1 or 2, for
	slot1 or slot2). Note: All of the Common Information fields
	support replacement characters. The replacement text is only shown in
	the SAP message at the destination decoder. The fields are replaced by
	the actual information as explained below.
	•	\H or \h – Host Name of VBrick appliance. When the default
		entry is used, the VBrick is identified by the default Host Name
		(set in IWS in the Network: Ethernet section), and will be
		identified as such on the network, see the StreamPlayer software
		example below.
	•	\B or \b – If the unit is a VBStar, this is the Base Name of the
		file being pumped by the Hard Drive Pump.
	•	\F or \f – If the unit is a VBStar, this is the control name of the
		File being pumped. The control name is a combination which
		consists of 25 characters from the directory name, 25 characters
		from the base name, 3 digits containing the file extension and
		the punctuation (53 total characters maximum). If the directory
		portion is not present, this is the base name of the file being
		pumped.
Program Author	A string in the SAP that can be used to identify the author. Default
	is "My Author."
Program Copyright	A string in the SAP that can be used to identify the copyright
	information. Default is "My Copyright."

34 © 2007 VBrick Systems, Inc.