Audio Input | Input can be from an Audio Jack (1/8" |
| Microphone DIN (AudioMate microphone). The default setting is |
| Audio Jack. |
|
|
Audio Balance | |
| is balanced. 127 sends audio to right channel only; |
| channel. |
|
|
Audio Input Level | |
| for more details. |
| • Normal – 7 to |
| • Alternate – 12 to |
|
|
Audio Gain (dB) | This setting controls the audio level of the encoder. It is model |
| dependent: |
•On models ending in
•On models ending in
If the Encoder PLX EEProm Revision is 1, the settings are from 3 to
If the EEProm PLX EEProm Revision is 2 or higher and the Audio Input Level is set to Normal, the settings are from 7 to
The default setting is 0 dB. A setting of 12 is the equivalent of full volume,
L+R Bit Rate | The transmission rate of the audio stream. If the model ends in |
| the transmission rate can be 192, 256 and 384 Kbps **If the model |
| ends in |
|
|
Sample Frequency | Frequency at which the audio is sampled at the encoder. If the model |
| number ends in |
| If the model number ends in |
| 48 KHz. |
30 | © 2007 VBrick Systems, Inc. |