VBrick Systems VB4000, VB6000, VB5000 manual Configuration Decoder Network

Right Gain	Used to adjust volume. Default = 0.
Configure PID	MPEG-2 transmits its data in packets of 188 bytes each. At the start
	of each packet is a packet identifier (or PID) identifies the data stream
	associated with that packet. Because the MPEG-2 data stream might
	contain multiple audio programs, the decoder has to choose a
	particular audio channel to play. The PID selection provides that
	feature. If the user chooses the automatic PID option, the first audio
	PID detected will be used to select the audio channel.
Actual PID	Actual PID being played. This read-only parameter is of interest when
	the user selects automatic. A value of 8191 indicates the PID has not
	yet been established.

Configuration: Decoder > Network

These parameters are decoder level IP parameters that instruct the decoder which IP stream to decode on TV monitors.

Receive Enable

Controls whether the decoder receives the video from the network.

20 © 2007 VBrick Systems, Inc.