VBrick Systems VB5000, VB6000, VB4000 Configuration System SNMP Traps, Front Panel LCD Display

	MPEG-2 Configuration
Time Zone	Select from list: (GMT-12) Eniwetok – (GMT +12) Auckland.
Daylight Savings Time	Enabled or Disabled.
IR Enable	Enable or Disable the IR remote control. This is the master
	enable and disable for the IR across all functions.
Fan Mode	This option allows a user to either force the fan always high or to
	automatically cycle on and off based on measured temperature.
	Default = Automatic. Note: This option is only available on
	VBrick models with a main board assembly whose last four digits
	are 0206 or higher.
SAP Timing Method	Fixed or Variable - If fixed, the SAP timing will operate as
	defined in the encoder, decoder and pump screens with fixed
	SAP transmission and timeouts. If variable is selected, the entire
	VBrick will use SAP timing as defined in RFC 2974. For most
	applications, Fixed Timing should be used.
RFC2974 Bandwidth	Allows setting the SAP bandwidth allocation in Bits per second.
	This setting is used only when the Timing Method is set to
	Variable.
Relay Control	This option allows forcing the relay connection to Open or
	Closed. Note: This option is only available on VBricks with a
	main board assembly whose last four digits are 0205 or higher.
Vision Protocol	Enables a proprietary management protocol. Do not use unless
	directed.

Front Panel LCD Display

These settings will be displayed for approximately 6 seconds. After 6 seconds the LCD will display the current release, IP address, hostname plus transmit and receive addresses.

Box IP Address	Enable or Disable the Box IP Address display on the Front Panel
	Display.
Destination IP	Enable or Disable the Destination IP Address display on the Front
Address	Panel Display.
Receive IP	Enable or Disable the Receive IP Address display on the Front Panel
Address	Display.
User String	Enable or Disable the text displayed on the front panel LCD of the
Enabled	VBrick appliance can be user defined.
Top Line User	The top line can support up to 16 characters. (characters in excess of
String	16 will scroll across the display for the bottom line).
Bottom Line User	The bottom line up to 40 characters.
String

Configuration: System > SNMP Traps

SNMP Traps are a subset of the SNMP management component of the VBrick. Use of any element of the SNMP management system requires use of an SNMP browser or SNMP

VBrick MPEG-2 Appliance Admin Guide 45