VBrick Systems VB4000, VB6000, VB5000 manual Configuration Billboard, Configuration Network IPv6

Configuration: Network > IPv6

In the current implementation of IPv6, MPEG-2 encoded streams can be unicast over IPv6 to an IPv6-enabled version of VBrick StreamPlayer. In this version, you continue to manage and configure the appliance over IPv4.

IPv6 Auto Config Enable	Enable IPv6. When enabled, the IPv6 parameters for IP
	Address and Gateway IP Address are automatically set. This is
	the recommended method.
IP Address	IPv6 IP address of the VBrick.
Gateway IP Address	Valid gateway IPv6 IP address for communicating across
	distinct network segments. A valid gateway IP address is
	essential even though the VBrick will operate without one in
	some cases. When no gateway is configured, the VBrick may be
	unable to communicate with off-net IP hosts, for example, a
	foreign host which is used for configuration management via
	IWS.

Configuration: Billboard

The Billboard feature allows you to display text and/or graphics on a TV monitor. The displayed billboard can span multiple pages with each page displayed for a specified period of time. Some uses of the billboard feature are to announce a daily calendar of events, directions to a particular conference room or even a slide presentation in conjunction with displayed video. VBrick models 62xx, 52xx and 53xx have a built in mini-browsers that support viewing limited HTML pages. The pages can either be kept inside the VBrick as part of the file system, or can be located on a remote HTTP server. Each page of the billboard is built using an HTML page with text and graphics created using the HTML tags supported. If billboard is to be supported on a remote server, the appliance requires read access to the HTTP server and may need to be configured. The following URL example shows the default page pre- configured by VBrick.

14 © 2007 VBrick Systems, Inc.