VBrick Systems VB5000, VB6000, VB4000 manual Configuration Encoder Text Insertion

SAP Port

The receive IP port used to populate the Program Guide. This is typically the port number of the encoder.

Note SAP information appears in the Program Guide field displayed in other VBrick products, such as StreamPlayer and StreamPlayer Plus.

Configuration: Encoder > Text Insertion

The Text Insertion feature is a hardware option for MPEG-2 encoders and requires a separate daughter card. It lets you configure text messages that overlay the video stream during encoding. The message you configure here will be displayed and refreshed as the stream is decoded. You can configure blink style, refresh rate, transparency, and other options. You can also create and enable five pre-configured messages.

Refresh Interval	1–30 seconds. Specifies how often to repaint the text message.
	Default = 10. Note that what appears as "flickering" may occur when
	blinking is coincident with the refresh interval.
Blending Option	0–63. Specifies the opacity of the text. At 63 the text is solid (non-
	transparent). Default = 63.
Line	One line number for each message. You can save a maximum of five
	different messages.

36 © 2007 VBrick Systems, Inc.