General

General

COM1/COM2

The current operational state of COM1/COM2 serial Passthrough

Passthrough

port. There will be a conflict if the slot selected through the

Operational State

Passthrough Destination parameter has neither an encoder nor a

 

decoder present; or has an encoder with a multicast destination; or has

 

an encoder with no configured destination. The possible values are:

 

Disabled

 

Enabled Active

 

• Enabled Conflict No Enc Or Dest

 

• Enabled Conflict Enc Multi Dest

 

• Enabled Conflict Enc No Dest

 

Enabled Internal Error

 

Enabled Rejected

 

• No Dedicated IP Addr

 

 

Conferencing State

This setting indicates the unicast call state of the encoder.

 

• Free – Available for a conference.

 

• Busy – The VBrick is currently engaged in a conference.

 

• Disabled – The conference feature has been disabled.

 

• Unknown – The VBrick is in a transition state.

 

 

Active RFC-SAP

This is the number of SAP sessions the appliance is currently listening

Count

to for the purpose of RFC 2974-compliant SAP timing. This field

 

displays values when SAP timing is configured for RFC 2974 mode.

 

 

Network Port

The status of the Ethernet network interface: Link OK or No Link.

Status

 

 

 

 

Network Port

The speed of transmission for the Ethernet network interface: 10Mbit

Speed

or 100Mbit.

 

 

 

64

© 2007 VBrick Systems, Inc.

Page 72
Image 72
VBrick Systems VB6000, VB4000, VB5000 manual General, or 100Mbit