VBrick Systems VB6000, VB4000, VB5000 manual Configuration Recorder Network

VBStar

record mode and the recorder attempts to open a new file that has not been completely transferred, the recorder will stop. The Failure condition is noted in the Recorder Status menu.

Configuration: Recorder > Network

The Network configuration tab is only displayed if you select Dedicated for Recorder Source on the previous Configuration: Recorder > General page.

Receive Address	Allows the user to specify how the receive address will be
Mode	configured: IP address or Host Name.
Receive Host Name	The source for video to be received by using Host Name of the
	source. This parameter can be used only for a unicast source.
Receive IP Address	In multicast mode, this parameter selects the receive IP Address for
	the Recorder. In unicast mode, this parameter is optional. If left
	blank, the Recorder will accept all data received on the receive IP
	port. If set, the Recorder will communicate with any VBrick having
	the encoder "unicast poll" option set and instruct it not to transmit
	its stream unless the encoding VBrick has the selected receive IP
	Address.
Receive Port	The receive port designates what local IP port is assigned to listen
	for incoming video.
Receive Mode	This read-only parameter informs the operator whether the selected
	receive IP Address is Unicast or Multicast.

VBrick MPEG-2 Appliance Admin Guide 109