VBrick Systems VB5000, VB6000, VB4000 manual Routing Method

Routing Method	This selects which routing method will be used: Changes made to the
	Routing Method will require a reset of the box.

•Static – Allows routes entered in the static routing table to be automatically applied to the internal routing tables, after a power- up.

•RIP Version 1 – Configures the VBrick to listen to RIP announcements. Routes are dynamically added per RIP specification.

•RIP Version 2 Broadcast – Configures the VBrick to listen to RIP version 2 announcements. In this mode, RIP will perform classless routing based upon subnet mask.

•RIP Version 2 Multicast – Configures the VBrick to listen to RIP version 2 announcements that are sent in multicast mode. Both broadcast and multicast announcements are processed.

Static Routing	This table provides for user defined routing entries.
Table	• Destination Network – Enter the destination address to be
	manually routed.

•Local Gateway IP – Enter the Gateway to be used, when the forwarding destination address is as specified.

•Network Mask – Sets the network mask to be associated with the destination address.

•Error – This read-only field is used to report field entry error related to the route.

12 © 2007 VBrick Systems, Inc.