Vertical Offset Correction

the SDI output module. The SDI output module is available with model numbers ending in – x110, –x011, -x111, -x010, -x012, –x112.

Configuration: Encoder

The following sections explain how to configure SDI encoders and decoders. Note that closed captioning is not supported on SDI encoders or decoders.

Configuration: Encoder > Video

These parameters are used to configure the encoder video settings. The SDI (Serial Digital Interface) is only available on –xxx1/-xxx2 equipped units (see Status: User Information for part number). Several additional configuration parameters are available with SDI models. For SDI equipped units, everything is the same as for VBrick models ending in -xxx1/-xxx2, except for the fields shown below. Note that the Hue field is not available with SDI.

Vertical Offset Correction

This setting controls vertical offset correction for SDI

 

appliances.

 

 

SDI Cable Equalizer

This setting allows selection of SDI Cable Equalizer settings.

 

If set to on, the SDI Cable Equalizer maintains SDI signal

 

quality when SDI cables have a length greater than 10 meters.

 

 

58

© 2007 VBrick Systems, Inc.

Page 66
Image 66
VBrick Systems VB6000, VB4000, VB5000 manual Configuration Encoder Video, Vertical Offset Correction