Operation and Maintenance
4.OPERATION OF WIRELESS REMOTE CONTROL UNIT
4.6Using of the “SPECIAL” Features & Remarks
“DRY” Operation
How it works?
•During DRY operation, the fan speed is automatically set to LOW.
•If the room temp. is 2 °C higher than the Set Temperature, the unit will run in COOL mode.
•Once the room temp. reaches ± 2 °C of the level that was set, the unit repeats the cycle of compressor turning “ON” 6 mins and turning “OFF” 4 mins automatically.
“AUTO” Operation
How it works?
“BLOW” Operation
How it works?
•When AUTO mode is selected, the default temperature will be displayed on the LCD, the unit will be in accordance with the room temperature automatically to select the suitable running method and to adjust ambient comfortable.
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould. Once blow function is on, while the unit is off by pressing the ON/OFF button, the indoor fan will continue running for about 10 min. at low speed. In this period, press “BLOW” button again can stop indoor fan directly.
“TURBO” Operation
How it works?
“LIGHT” Operation
How it works?
During “COOL” or “HEAT” mode, if start this function, the unit will run at
It's a special selective button for the users , who are not accustomed to the light at sleeping.
Setting “ON” the displayer indicator light
“LOCK” Operation
How it works?
When setting the light function, the mark will display on the remote controller screen by pressing this button. In which case, the displayer indicator light will be on if the AC receives this signal.
Setting “OFF ” the displayer indicator light
To cancel the light function, the mark will disapper on the remote controller screen. In which case, the displayer indicator light will be off if the unit receives this signal.
Press “+” and
keyboard. If the remote controller is locked, the will be displayed on it, inwhich case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.
13