Haier KC18AGH 4.2Remote Control Unit Functions Continued, Auto, Operation and Maintenance

Operation and Maintenance

4.OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.2Remote Control Unit Functions (Continued)

FAN SPEED selector button

TEMP button

NOTE

BLOW button

LIGHT button

TURBO button

SLEEP button

CLOCK Button

SWING Button

NOTE

AUTO :	The air conditioner automatically decides the fan speeds.
:	Low fan speed.
:	Medium fan speed.
:	High fan speed.

AUTO

Press to see set temperature or indoor temperature which show on the indicator lamp according to customer requirement.

: Display the presetting temperature.

: Display the indoor ambient temperature (5 seconds)

It will display the ambient temperature for 5 seconds, After 5s later, then will back to display the presetting temperature.

: Current displaying status will not be changed. No Icon : Default to display the pesetting temperature.

Press to begin or stop indoor fan from blowing indoor components to dry. This function applicable to “COOL” & “DRY” mode only. In “AUTO”, “FAN” as well as “HEAT” mode, “BLOW” function can not be set up and there is no “BLOW” displaying.

Press this button will turn ON / OFF the display of indicator light.

Press to quickly cool or heat the room with intense cool or hot air.

For details, see “SLEEP MODE” (P.g 12). When you press this button in the“DRY” or “COOL” mode, the mark appears in the display, and the remote control unit will automatically adjust the set temperature to save energy.

Use this button to set the clock.

How it Works?

Press clock button, signal blink and display. Within 5 seconds, the value can be adjusted by pressing “+” or “-” button, if press this button continuously for 2 seconds and above, in every 0.5 seconds, the value on ten place of Minute will be increased 1. During blinking, repress the Clock button, signal will be constantly displayed and it denotes the setting succeeded. After powered on, 12:00 is defaulted to display and signal will be displayed. If there is signal be displayed that denotes the current time value is Clock value, otherwise it is a Timer value.

To set the air swing direction which circurlarly change as:

OFF

When the guide louver start to swing up and down, if turn off the Swing, the air guide louver will stop at the current position. (refer P.g 14 for more detail)

9