Paradyne 3161 DSU, 3161 CSU manual Port Configuration Options 2

Table 2. Port Configuration Options (2 of 3)

Option

Factory 1

Factory 2

Comments/Description

	Disab	Disab
	DTLB	DTLB	Port-initiated Loopbacks, allows
Port LB:			Loopbacks to be initiated through
	DCLB	DCLB
			the port by the external DTE.
	Both	Both
	Disab	Disab
	DTR	DTR	All ones sent to network (DTE) T1
All Ones:
	RTS	RTS	when DTR or RTS interrupted.
	Both	Both
Rcv Yellow:	None	None	Data port remains enabled, or is
			disabled, on receiving Yellow on
(Received Yellow)	Halt	Halt
			network T1.
	Int	Int	Selects whether the transmitted
Tx Clock:			data clock is internal (TXC) or
	Ext	Ext
			external (XTXC).
InvertTxC:	Enab	Enab	Selects phase inversion of the
(Invert Tx Clock)	Disab	Disab	transmit clock (TXC).
	Enab	Enab	Allows the data on the port to be
InvertData:
	Disab	Disab	inverted.
	Enab	Enab	Specifies whether the Embedded
EDL:
	Disab	Disab	Data Link is enabled.
	10E±4	10E±4
	10E±5	10E±5
Err Rate:	10E±6	10E±6	Selects the error rate threshold for
(Excessive Error			Excessive Error Rate Alarm.
	10E±7	10E±7
Rate)
	10E±8	10E±8
	10E±9	10E±9
	Disab	Disab
	Maint	Maint	Specifies whether the device will
Near-end:			maintain near-end performance
	Send	Send
			statistics.
	Both	Both

6