Technical Specifications
Specifications
Criteria*
Size | 10.4 inches (L) x 11.15 inches (H) x .8 inches (W) |
|
|
Weight | Approx. 1.4 lbs. |
|
|
Approvals |
|
Safety Certifications | Refer to the equipment's label for approvals on product. |
|
|
Power | The DSL card contains a |
| requires ±48V power input. The ±48V power is |
| distributed through the HotWire DSLAM backplane. |
| Maximum Power Dissipation = 18 watts |
|
|
Physical Environment
Operating temperature
Storage temperature
Relative humidity
Shock and vibration
32° to 122°F (0° to 50°C)
±4° F (±20°C) to 158° F (70°C)
5% to 85% (noncondensing)
Withstands normal shipping and handling.
* Criteria of technical specifications are subject to change without notice.
Planning the DSL Card Installation
Review the following list to help plan for the installation.
Obtain the applicable cables; refer to the next section, Cables You Need.
Make sure the HotWire DSLAM chassis is installed and power is supplied to the chassis.
After the DSL card is installed, there are configuration instructions that must be performed before you can begin to use the DSL cards for Internet or Intranet connectivity. Refer to the HotWire DSLAM for 8540 and 8546 DSL Cards User's Guide, Document No.
2 | October 1997 |