4300 Remote Broadband Access Concentrator Installation Instructions
Inspecting Shipment
On receipt of the equipment, inspect the shipping container(s) and note any signs of damage. Then unpack the container(s) and carefully inspect for damage to the contents. If the equipment has been damaged in transit, immediately report the extent of damage to the transportation company and your sales representative.
Warranty, Sales, Service, and Training Information
Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one of the following methods:
•Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty at www.paradyne.com/warranty.)
•Telephone: Call our automated system to receive current information by fax or to speak with a company representative.
–Within the U.S.A., call
–Outside the U.S.A., call
Trademarks
GranDSLAM is a registered trademark of Paradyne Corporation. All other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners.
Product Overview
The 4300 Remote BAC is a
The cabinet is constructed of aluminum with a powder coat painted finish for reduced weight and superior corrosion resistance. The front door is equipped with a quarter turn padlockable door latch. The top of the cabinet has a double wall construction to reduce the effects of solar radiation and for structural integrity.
Cooling is provided by a
The left front of the
Cable entry and exit from the cabinet passes through two sealing boots located in the bottom rear of the equipment bay. The master grounding bus bar is located on the rear wall of the equipment bay on the left side. AC and DC power centers are mounted to the rear wall on the right side.
July 2004 | 3 |