Paradyne 9550 DS3 installation instructions EMI Notices, CE Marking Japan Notice

Page 17

EMI Notices

United States – EMI Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Paradyne Corporation.

If the equipment includes a ferrite choke or chokes, they must be installed as described in the installation instructions.

Canada – EMI Notice

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

CE Marking

When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.com. Select Library Technical Manuals CE Declarations of Conformity.

Japan Notice

Class A ITE

This is a Class A product based on the standard of the Voluntary Control Council for interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

17

Image 17
Contents IMarc 9550 DS3 Probe ContentsSoftware and Firmware License Agreement Product Documentation Online Unpacking and Inspecting the Equipment Installing the Brackets for Rack MountingInstalling in a Rack Connecting to Power 05-17708 Connecting the Subscriber Port DS3 Connecting to the DS3 NetworkLAN Connecting the Ethernet PortConnecting the Modem Port Connecting the Console Port Press Using the Asynchronous Terminal InterfaceStatus Menu HierarchyConfiguration Saving Configuration Options CE Marking Japan Notice EMI NoticesImportant Safety Instructions Warranty, Sales, Service, and Training Information 9550-A2-GN10-00