Installing in a Rack

19-inch (483 mm) Rack Mount	23-inch (584 mm) EIA and Bay Networks
	Rack Mount

05-17709

23-inch (584 mm) Nortel

Rack Mount

Two types of mounting screws are provided. Use:

#10-32 mounting screws for rails with threaded screw holes

#12-24 mounting screws and self-retaining nuts for rails with unthreaded screw holes

Procedure

To install the Probe in a rack:

1.Determine where in the rack you will mount the Probe. If your rack does not have threaded screw holes, slip self-retaining nuts onto the rails where the Probe will be fastened.

2.Place the unit so that the brackets rest against the front of the rails. Insert screws in the bottom screw positions and hand-tighten them.