Paradyne 9550 DS3 installation instructions 05-17708

Page 7

3.Plug the socket end of the power cord into the power receptacle on the back of the Probe.

4.Plug the power cable into a 120 VAC, 60 Hz outlet.

05-17708

7

Image 7

Contents IMarc 9550 DS3 Probe ContentsSoftware and Firmware License Agreement Product Documentation Online Unpacking and Inspecting the Equipment Installing the Brackets for Rack MountingInstalling in a Rack Connecting to Power 05-17708 Connecting the Subscriber Port DS3 Connecting to the DS3 NetworkLAN Connecting the Ethernet PortConnecting the Modem Port Connecting the Console Port Press Using the Asynchronous Terminal InterfaceStatus Menu HierarchyConfiguration Saving Configuration Options CE Marking Japan Notice EMI NoticesImportant Safety Instructions Warranty, Sales, Service, and Training Information 9550-A2-GN10-00