Paradyne 6218-I1 manual Hardware Installation LED Indicators This LED Should be

2. Hardware Installation and PC Setup

ON/OFF POWER	LAN4	LAN3	LAN2	LAN1
					LINE
	RESET				CONSOLE
	DEFAULT

05-17715

Figure 2-1. Hardware Installation

Table 2-1. LED Indicators

This LED . . .	Should be:
POWER	Solid green to indicate that the device is turned on. If this light is not
	on, check if the power adapter is attached to the router and plugged
	into an AC power source.
STATUS	Solid green to indicate that the router can communicate with your ISP
	via ADSL, or flashing when the router is trying to connect to your ISP.
ACTIVITY	Flashing when the device is sending or receiving data over the ADSL
	connection.
LAN	Solid green to indicate that the device can communicate with your PC
	via Ethernet, or flashing when the router is sending or receiving data
	over Ethernet.

If the LEDs are illuminated as expected, the router is working properly.

6218-A2-GB23-00 September 2005 2-3