AirborneDirect™ Serial Device Server Quick Start Guide | Quatech, Inc. |
| Step |
|
| Description |
|
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Select Wireless LAN Connection Type |
|
| If you are using Access Points make sure this is set to |
|
|
|
|
| Infrastructure from the drop down menu. |
|
|
|
|
| If you want to use AdHoc set this accordingly. Additional |
|
|
|
|
| settings may be required to fully configure for AdHoc mode. |
|
|
|
|
| Please refer to the User’s Manual for details. |
|
|
|
|
|
|
|
| Select SSID |
|
| Enter the name of the wireless network you wish to access. This |
|
|
|
|
| field is case sensitive. |
|
|
|
|
|
|
|
| Select Wireless LAN Security Type |
|
| Select the security type the wireless network you wish to access |
|
|
|
|
| is using. Depending upon the option you choose you may have |
|
|
|
|
| to enter additional information. Once you have selected the |
|
|
|
|
| security type the required inputs will be made accessible by un- |
|
|
|
|
| graying the fields that must be completed. |
|
|
|
|
| If the security type is not in the available selections, more are |
|
|
|
|
| available in the WLAN Security Settings page. If you choose to |
|
|
|
|
| use this page make sure you commit the changes you have |
|
|
|
|
| already made before moving to the WLAN Security Settings |
|
|
|
|
| page. |
|
|
|
|
|
|
|
| Select WLAN DHCP |
|
| If your WLAN network uses DHCP to assign IP addresses to the |
|
|
|
|
| wireless clients, select Enabled from the drop down menu. |
|
|
|
|
| If you are using static IP addresses select disabled from the |
|
|
|
|
| drop down menu. WLAN Static IP and WLAN Subnet Mask |
|
|
|
|
| will need to be entered. |
|
|
|
|
|
|
|
| Select Ethernet DHCP |
|
| If the Ethernet network connected to the Ethernet port uses |
|
|
|
|
| DHCP to assign IP addresses to the wired clients, you should |
|
|
|
|
| select Enabled from the drop down menu. |
|
|
|
|
| If you are using static IP addresses you should select Disabled |
|
|
|
|
| from the drop down menu. Ethernet Static IP and Ethernet |
|
|
|
|
| Subnet Mask will need to be entered. |
|
|
|
|
| Important: This field is only used if the Ethernet interface is |
|
|
|
|
| set as a client (default for Serial devices). If set as a router the |
|
|
|
|
| field is ignored. See the User’s Manual for a full description of |
|
|
|
|
| configuring the unit as an Ethernet router. |
|
|
|
|
|
|
|
| Select WLAN Static IP |
|
| This field defines the static IP address for the wireless interface. |
|
|
|
|
| This address is only used if the WLAN DHCP is disabled or |
|
|
|
|
| DHCP failed. |
|
|
|
|
| Default: 192.168.10.1 |
|
|
|
|
|
|
|
| Select WLAN Subnet Mask |
|
| This field defines the subnet mask used by the wireless |
|
|
|
|
| interface. |
|
|
|
|
| This mask is only used if the WLAN DHCP is disabled or DHCP |
|
|
|
|
| failed. |
|
|
|
|
| Default: 255.255.255.0 |
|
|
|
|
|
|
|
| Select Ethernet Static IP |
|
| This field defines the static IP address for the Ethernet |
|
|
|
|
| interface. When configured as a serial device server (Ethernet |
|
|
|
|
| interface is in client mode) this address is only used if the |
|
|
|
|
| Ethernet DHCP is disabled or DHCP failed. |
|
|
|
|
| Default: 192.168.2.100 |
|
|
|
|
|
|
|
| Select Ethernet Subnet Mask |
|
| This field defines the subnet mask used by the Ethernet |
|
|
|
|
| interface. When configured as a serial device server (Ethernet |
|
|
|
|
| interface is in client mode) this mask is only used if the |
|
|
|
|
| Ethernet DHCP is disabled or DHCP failed. |
|
|
|
|
| Default: 255.255.255.0 |
|
|
|
|
|
|
|
| Press Commit [Button] |
|
| Saves changes to the device. |
|
|
|
|
|
|
|
| Optional |
|
| Reloads the Express Settings page. Select this is you have |
|
| Press Reload [Button] |
|
| further configuration options to change. |
|
|
|
|
|
|
|
5 | February 2011 |