Patton electronic 2702 G.703 Radio and TV Interference, CE and Telecommunication Approvals

Page 3

1.2 RADIO AND TV INTERFERENCE

The Model 2702 generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer's instructions-may cause interference to radio and televi- sion reception. The Model 2702 has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection from such interference in a commer- cial installation. However, there is no guarantee that interference will not occur in a particular installation. If the Model 2702 does cause interference to radio or television reception, which can be determined by disconnecting the cables, the user is encouraged to try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna, and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.3 CE AND TELECOMMUNICATION APPROVALS

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.

The Model 2702 is in compliance with the Telecommunication technical requirements CRT-12; 2.048 Mbps digital unstructured leased line (D2048U) attachment requirements for terminal equipment interface.

1.4 SERVICE INFORMATION

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Support at:

tel: (301) 975-1007;

email: support@patton.com

www:http://www.patton.com.

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 2702. Technical Services hours: 8AM to 5PM EST,

Monday through Friday.

3

4

Page 2 Page 4
Image 3
Page 2 Page 4
Contents User Manual Patton Model Table of Contents Warranty StatementGeneral Information Tel 301 Email support@patton.com Service InformationRadio and TV Interference CE and Telecommunication Approvals2702 as the Interface between the Telco and CPE FeaturesGeneral Product Description Supported ApplicationsSwitch SW1 Line Coding ConfigurationDIP Switch Configuration Switch SET Summary TableNetwork Interface Connection Clock Mode Settings SW3 SW4Clock Modes DTE Interface ConnectionRXD Power ConnectionLED Descriptions TXDERR Loop V.54 & Telco DiagnosticsLotc ALMPatton Model Cable Recommendations SpecificationsAppendix C RJ-48C E1 Network InterfacePatton Model # Description RJ-48S Female Modular Jack Jumper Position for Power via Pin KK Connector, Terminal InterfacePatton Model Power Supply Interface Jumper Position for Power via DC Power Jack default

2702 G.703 specifications

The Patton Electronics 2702 G.703 is a highly regarded solution in the realm of telecommunications, particularly known for its ability to convert G.703 digital interfaces into other manageable forms. This device plays a crucial role in the deployment of voice and data services over TDM (Time Division Multiplexing) networks, making it a go-to choice for service providers and enterprises needing to optimize their communications infrastructure.

One of the standout features of the Patton 2702 G.703 is its versatility. It can support various TDM interface types, including E1, T1, and coaxial connections, which allows for seamless integration into existing network configurations. This adaptability is critical for organizations looking to enhance their network without investing in entirely new systems.

Moreover, the device supports both unframed and framed G.703 E1 and T1 signals, giving users the flexibility to select the configuration that best suits their operational needs. The Patton 2702 is equipped with advanced error correction capabilities, which enhance the reliability of data transmission, particularly for mission-critical applications. This ensures that businesses can maintain seamless operations with minimal disruptions.

Another noteworthy characteristic of the device is its robust management capabilities. The Patton 2702 offers a web-based interface for configuration and monitoring, allowing network administrators to easily manage their devices and troubleshoot any potential issues. This feature is complemented by SNMP (Simple Network Management Protocol) support, which integrates with existing network monitoring solutions for enhanced visibility.

The device also supports in-band management, enabling remote control and diagnostics over the same connection used for data transfer. This capability significantly reduces the need for on-site intervention, ultimately improving operational efficiency and reducing costs.

In terms of physical characteristics, the Patton 2702 is housed in a compact and durable chassis, suitable for rack-mounted or standalone deployment. Its design prioritizes thermal management and operational reliability, ensuring long-term performance in various environmental conditions.

Overall, the Patton Electronics 2702 G.703 is a multifaceted solution tailored to meet the demands of modern telecommunications. Its advanced features, robust management options, and flexible integration capabilities make it an invaluable asset for businesses looking to streamline their communication processes while maintaining the integrity and reliability of their networks.
Top Page Image Contents