Patton electronic 2702 G.703 Patton Model Interface PIN Assignment, Connector, Terminal Interface

Page 11

APPENDIX D

(continued)

PATTON MODEL 2702

INTERFACE PIN ASSIGNMENT

M/34 Connector, Terminal Interface

Pin #

Signal

AGND (Earth Ground/Shield)

BSGND (Signal Ground)

DCTS (DCE Source)

EDSR (DCE Source, Always On)

FCD (DCE Source)

L

LL (Local Loop, DTE Source)

MTM (Test Mode Indicator (DCE Source)

NRL (Remote Loop, DTE Source)

PTD (Transmit Data +, DTE Source)

R RD (Receive Data +, DCE Source)

S TD/ (Transmit Data -, DTE Source)

T RD/ (Receive Data -, DCE Source)

U SCTE (Transmit Clock+, DTE Source)

V RC (Receiver Clock +, DCE Source)

W SCTE/ (Transmit Clock-, DTE Source)

X RC/ (Receiver Clock -, DCE Source)

Y TC (Transmitter Clock +, DCE Source)

AA TC/ (Transmitter Clock -, DCE Source)

KK Aux. Power Input (+5VDC @ 300mA)

APPENDIX E

PATTON MODEL 2702

POWER SUPPLY INTERFACE

Via Main 5VDC power jack (J1)

Center Pin:

5VDC @ 300 mA

Outer Barrel:

Ground

Barrel Plug:

2.1/5.5/10mm I.D./O.D./Shaft Length dimensions.

Jumper Position for Power via DC Power Jack (default):

Via Auxiliary Power Supplied to Pin KK on V.35 connector

DC Power supplied to pin KK must be 5VDC ± 5%, 300mA minimum.

Jumper Position for Power via Pin KK:

NOTE: Model 2702 is factory configured to accept power from the enclosed DC wall adapter (See Sections 4.3.1 and 4.3.2 above). If you wish to supply power via pin KK on the interface, you must change the setting of the power supply jumper on the printed cir- cuit board. All power sources must be SELV (Circuit, Safety Extra Low Voltage) specified. (See CENELEC EN60950, Section 1.2.8.5)

19

20

Image 11
Contents User Manual General Information Patton Model Table of ContentsWarranty Statement Tel 301 Email support@patton.com Service InformationRadio and TV Interference CE and Telecommunication Approvals2702 as the Interface between the Telco and CPE FeaturesGeneral Product Description Supported ApplicationsSwitch SW1 Line Coding ConfigurationDIP Switch Configuration Switch SET Summary TableNetwork Interface Connection Clock Mode Settings SW3 SW4Clock Modes DTE Interface ConnectionRXD Power ConnectionLED Descriptions TXDERR Loop V.54 & Telco DiagnosticsLotc ALMPatton Model Cable Recommendations SpecificationsPatton Model # Description RJ-48S Female Modular Jack Appendix CRJ-48C E1 Network Interface Jumper Position for Power via Pin KK Connector, Terminal InterfacePatton Model Power Supply Interface Jumper Position for Power via DC Power Jack default

2702 G.703 specifications

The Patton Electronics 2702 G.703 is a highly regarded solution in the realm of telecommunications, particularly known for its ability to convert G.703 digital interfaces into other manageable forms. This device plays a crucial role in the deployment of voice and data services over TDM (Time Division Multiplexing) networks, making it a go-to choice for service providers and enterprises needing to optimize their communications infrastructure.

One of the standout features of the Patton 2702 G.703 is its versatility. It can support various TDM interface types, including E1, T1, and coaxial connections, which allows for seamless integration into existing network configurations. This adaptability is critical for organizations looking to enhance their network without investing in entirely new systems.

Moreover, the device supports both unframed and framed G.703 E1 and T1 signals, giving users the flexibility to select the configuration that best suits their operational needs. The Patton 2702 is equipped with advanced error correction capabilities, which enhance the reliability of data transmission, particularly for mission-critical applications. This ensures that businesses can maintain seamless operations with minimal disruptions.

Another noteworthy characteristic of the device is its robust management capabilities. The Patton 2702 offers a web-based interface for configuration and monitoring, allowing network administrators to easily manage their devices and troubleshoot any potential issues. This feature is complemented by SNMP (Simple Network Management Protocol) support, which integrates with existing network monitoring solutions for enhanced visibility.

The device also supports in-band management, enabling remote control and diagnostics over the same connection used for data transfer. This capability significantly reduces the need for on-site intervention, ultimately improving operational efficiency and reducing costs.

In terms of physical characteristics, the Patton 2702 is housed in a compact and durable chassis, suitable for rack-mounted or standalone deployment. Its design prioritizes thermal management and operational reliability, ensuring long-term performance in various environmental conditions.

Overall, the Patton Electronics 2702 G.703 is a multifaceted solution tailored to meet the demands of modern telecommunications. Its advanced features, robust management options, and flexible integration capabilities make it an invaluable asset for businesses looking to streamline their communication processes while maintaining the integrity and reliability of their networks.