Patton electronic 2702 G.703 user manual Specifications, Patton Model Cable Recommendations

Page 9

 

APPENDIX A

 

PATTON MODEL 2702

 

SPECIFICATIONS

Network Data Rate:

2.048 Mbps + 50ppm

Network Connector:

RJ-48C

Nominal Impedance:

120 ohm (75 ohm available when using

 

Patton Model 460 Balun)

DTE/DCE Interface:

V.35 (DCE Orientation) on Male M/34

Line Coding:

Selectable AMI or HDB3

Line Framing:

G.703 (Unframed)

Clocking:

Network, Internal, External (from DTE)

DTE Data Rates:

2.048 Mbps

Diagnostics:

V.54 Loopback & Local Loopback

Indicators:

Power, Transmit Data, Receive Data,

 

Alarm, Loss of Tx Clock, Test Mode,

 

Error

Configuration:

8-Position DIP Switch

Power:

Regulated 5VDC + 5%, 300 mA mini-

 

mum

Humidity:

Up to 90% non-condensing

Temperature:

0 to 50o C

Dimensions:

4.8”L x 2.0”W x 0.88”H (12.2 x 5.1 x 2.2

 

cm)

APPENDIX B

PATTON MODEL 2702

CABLE RECOMMENDATIONS

The Patton Model 2702 has been performance tested by Patton technicians using twisted-pair cable with the following characteristics:

Wire Gauge

Capacitance

Resistance

19 AWG

83nf/mi or 15.72 pf/ft.

.0163 Ohms/ft.

22 AWG

83nf/mi or 15.72 pf/ft.

.0326 Ohms/ft.

24 AWG

83nf/mi or 15.72 pf/ft.

.05165 Ohms/ft.

To gain optimum performance from the Model 2702 , please keep the following guidelines in mind:

•Always use twisted pair wire—this is not an option.

•Use twisted pair wire with a capacitance of 20pf/ft or less.

•Avoid twisted pair wire thinner than 26 AWG (i.e. avoid AWG numbers higher than 26)

•Use of twisted pair with a resistance greater than the above specifications may cause a reduction in maximum distance obtain- able. Functionality should not be affected.

•Many environmental factors can affect the maximum distance obtainable at a particular site. Use the above data rate/distance table as a general guideline only.

15

16

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User Manual Patton Model Table of Contents Warranty StatementGeneral Information Radio and TV Interference Service InformationCE and Telecommunication Approvals Tel 301 Email support@patton.comGeneral Product Description FeaturesSupported Applications 2702 as the Interface between the Telco and CPEDIP Switch Configuration ConfigurationSwitch SET Summary Table Switch SW1 Line CodingClock Modes Clock Mode Settings SW3 SW4DTE Interface Connection Network Interface ConnectionLED Descriptions Power ConnectionTXD RXDLotc Loop V.54 & Telco DiagnosticsALM ERRPatton Model Cable Recommendations SpecificationsAppendix C RJ-48C E1 Network InterfacePatton Model # Description RJ-48S Female Modular Jack Patton Model Power Supply Interface Connector, Terminal InterfaceJumper Position for Power via DC Power Jack default Jumper Position for Power via Pin KK

2702 G.703 specifications

The Patton Electronics 2702 G.703 is a highly regarded solution in the realm of telecommunications, particularly known for its ability to convert G.703 digital interfaces into other manageable forms. This device plays a crucial role in the deployment of voice and data services over TDM (Time Division Multiplexing) networks, making it a go-to choice for service providers and enterprises needing to optimize their communications infrastructure.

One of the standout features of the Patton 2702 G.703 is its versatility. It can support various TDM interface types, including E1, T1, and coaxial connections, which allows for seamless integration into existing network configurations. This adaptability is critical for organizations looking to enhance their network without investing in entirely new systems.

Moreover, the device supports both unframed and framed G.703 E1 and T1 signals, giving users the flexibility to select the configuration that best suits their operational needs. The Patton 2702 is equipped with advanced error correction capabilities, which enhance the reliability of data transmission, particularly for mission-critical applications. This ensures that businesses can maintain seamless operations with minimal disruptions.

Another noteworthy characteristic of the device is its robust management capabilities. The Patton 2702 offers a web-based interface for configuration and monitoring, allowing network administrators to easily manage their devices and troubleshoot any potential issues. This feature is complemented by SNMP (Simple Network Management Protocol) support, which integrates with existing network monitoring solutions for enhanced visibility.

The device also supports in-band management, enabling remote control and diagnostics over the same connection used for data transfer. This capability significantly reduces the need for on-site intervention, ultimately improving operational efficiency and reducing costs.

In terms of physical characteristics, the Patton 2702 is housed in a compact and durable chassis, suitable for rack-mounted or standalone deployment. Its design prioritizes thermal management and operational reliability, ensuring long-term performance in various environmental conditions.

Overall, the Patton Electronics 2702 G.703 is a multifaceted solution tailored to meet the demands of modern telecommunications. Its advanced features, robust management options, and flexible integration capabilities make it an invaluable asset for businesses looking to streamline their communication processes while maintaining the integrity and reliability of their networks.
Top Page Image Contents