Service, Tel 301 Email support@patton.com

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at

tel: (301) 975-1007;

email: support@patton.com

www:http://www.patton.com.

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1092. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

•Synchronous data rates: 19.2, 32, 56, 64 and 128 kbps

•Asynchronous data rates: 0 - 38.4 kbps

•Full duplex operation over a single twisted pair (2-wires)

•Point-to-point distances up to 5 miles (all data rates) on 24 AWG twisted pair

•Remote digital loopback, local line loopback diagnostic modes

•Field Replaceable DTE-DCE interface modules:

V.24/RS-232, V.35, RS-422/530, G.703 and X.21

•Internal, external or receive recovered clocking options

•LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS

•Made in the U.S.A.

2.2 DESCRIPTION

The Patton Model 1092 is a high speed, AC powered short range modem that is able to operate synchronously or asynchronously–full duplex–over a single twisted pair. Supporting data rates to128kbps (synchronous) or 38.4 kbps (asynchronous), the Model 1092 is capable of point-to-point distances up to 5 miles using 24 AWG wire.

The Model 1092 supports internal, external or receive loopback clocking in synchronous mode. Data rates and asynchronous data format may be configured locally using DIP switches.

The Model 1092 features replaceable DCE-DTE interface modules. Available interfaces include V.24/RS-232, V.35, RS-422/530, G.703 and X.21. Line connection is made by RJ-45C jack. Internal AC power supply options include 120/230VAC(switchable), and 100- 253VAC(universal). The internal DC power supply option supports any DC input between 40-60VDC.