Patton electronic 1082/144 user manual Warranty Information, FCC Information, CE Notice

Page 4

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1082 and Model 1082/144 com- ponents to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics spe- cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Patton Technical Support.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User Manual Table of Contents Model 1082 Specifications FCC Information Warranty InformationCE Notice Service Tel 301 Mailsupport@patton.comGeneral Information FeaturesDescription 1082 Snmp Management Solutions HTTP/HTML ManagementConfiguration Configuring the Hardware DIP SwitchesConfiguring DIP Switch S1 S1 Summary Table Position Function Factory DefaultSwitches S1-1 and S1-2 Data Rate Switch S1-3 Data Set Ready during Line Loopback TestS1-3 Setting S1-1 S1-2 Sync Data Rate Async. Data RateSwitch S1-4 Must be set to the on position Reserved Setting Switch S1-5 Asynchronous/Sync OperationS1-5 Setting Switches S1-6 and S1-7 System Clock ModeConfiguring DIP switch S2 S1-8 SettingS2 Summary Table Position Function Factory Default Switch S2-2 Front Panel Switch Disable S2-2 SettingSwitches S2-3 Response to Local Line Loop Requests from DTE Switches S2-4 and S2-5 Not AssignedSwitch S2-6 Response to RDL Request from DTE Switch S2-7 Compatability ModeS2-7 Activation Setting Switch S2-8 Not AssignedInstallation Connecting the Twisted Pair InterfaceConnecting the Model 1082 V.35 to a DTE Device Connecting the Model 1082 V.35 Serial InterfaceConnecting the Model 1082 V.35 to a DCE Device Connecting the Model 1082 X.21 Serial Interface Connecting the Model 1082 X.21 to a DCE or DTE DeviceConnecting the Model 1082 to X.21 DTE or DCE Opening the CaseConnecting Power Universal AC Power 100-240VACDC Power To Power Supply JackTo -48VDC VinSourcePOWER-UP OperationLED Status Monitors DSL LinkTest Modes Local Line Loopback LLBRemote Digital Loopback RDL Local Remote RDL initiatedUsing the V.52 BER test pattern generator Diagnostics LED Status IndicatorsAppendix a Transmission FormatConnectors PowerTemperature Range DimensionsAppendix B Model # DescriptionFemale Connector Pin # SignalAppendix C InterfaceAppendix D Sub-15 Female ConnectorDTE /DCE Orientation Appendix E

1082/144, 1082 specifications

The Patton Electronics 1082 and 1082/144 are advanced networking devices specifically designed for various telecommunication applications, highlighting their versatility in managing data transmission over different mediums. These devices, manufactured by Patton Electronics, a company known for its reputable and innovative solutions in the telecommunications industry, provide reliable connectivity and functionality essential for modern networking environments.

The Patton 1082 series is primarily a line of Ethernet over T1/E1 compact devices. These innovative tools allow users to extend Ethernet networks over traditional T1 or E1 circuits, addressing the growing demand for seamless data transfer in businesses without the need for extensive infrastructure upgrades. The ability to bridge local area networks (LANs) and wide area networks (WANs) with efficiency makes the 1082 an attractive choice for many enterprises.

A standout feature of the 1082 and its 1082/144 variant is their reliability and durability. Both units are designed to function consistently in various operational environments, making them suitable for installation in remote or harsh conditions. This reliability is critical for businesses that rely on constant data availability.

The devices offer enhanced security features with support for Advanced Encryption Standard (AES) capabilities, ensuring that data transmitted over connections remains secure from potential threats. With built-in diagnostics and performance monitoring tools, network administrators can easily assess the health of their networks and address any issues proactively.

Another significant characteristic of these units is their flexibility. The 1082 supports a variety of network configurations, making it adaptable to different types of installations. Users can configure the device to support VLAN tagging, allowing for improved network segmentation and management.

Both models support various Ethernet speeds, with the 1082/144 variant capable of handling a total of 144 T1/E1 multiplexed signals, which is particularly beneficial for organizations with high data transmission needs. The dual LAN ports ensure redundancy and high availability, a necessary feature for mission-critical applications.

Overall, the Patton Electronics 1082 and 1082/144 are robust solutions for businesses looking to enhance their networking capabilities. With their mix of reliability, security features, and flexible configurations, these devices represent a top choice for anyone seeking to optimize their data communication strategies.
Top Page Image Contents