Patton electronic 1082/144 user manual Switches S1-1 and S1-2 Data Rate, S1-3 Setting

Page 10

Note When setting the 1082 for SNMP Management, the DTE rate switches (S1-1,S1-2, and S2-1) must be also set to the ON posi- tion. Therefore, to set a 1082 unit SNMP Mangagement mode, the following switches have to be at the ON position, S1-1, S1-2, S2-1.

Switches S1-1 and S1-2: Data Rate

Use switches S1-1 and S1-2 to configure the asynchronous or synchro- nous data rate of the Model 1082 and Model 1082/144. Each setting rep- resents one synchronous data rate and one asynchronous data rate.

S1-1

S1-2

Sync Data Rate

Async. Data Rate

 

 

 

 

On

On

32 kbps

Reserved

Off

On

56 kbps

Reserved

 

 

 

 

On

Off

64 kbps

Reserved

 

 

 

 

Off

Off

128 kbps (see note)

0–38.4 kbps

 

 

 

 

Off

Off

144 kbps or 19.2 kbps (see note)

Reserved

 

 

 

 

Note The Model 1082 can also operate at the 19.2 kbps synchronous rate, and the Model 1092/144 can also operate at the 144 kbps synchronous rate. To operate at these rates, set switches S1-1 and S1-2 both to the OFF position and Switch S2-1 to the ON position (see section , “Configuring DIP switch S2” on page 122 for a description of Switch S2-1).

If the S2-1 switch is positioned in the OFF position, the 128 kbps sync data rate/0–38.4 kbps async data rate option is selected.

Switch S1-3: Data Set Ready during Line Loopback Test

Use Switch S1-3 to control the behavior of the DSR signal at the EIA interface during the line loopback test.

S1-3

Setting

 

 

On

DSR is on during local line loop

Off

DSR is off during local line loop

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User Manual Table of Contents Model 1082 Specifications FCC Information Warranty InformationCE Notice Service Tel 301 Mailsupport@patton.comGeneral Information FeaturesDescription 1082 Snmp Management Solutions HTTP/HTML ManagementConfiguration Configuring the Hardware DIP SwitchesConfiguring DIP Switch S1 S1 Summary Table Position Function Factory DefaultS1-3 Setting Switches S1-1 and S1-2 Data RateSwitch S1-3 Data Set Ready during Line Loopback Test S1-1 S1-2 Sync Data Rate Async. Data RateS1-5 Setting Switch S1-4 Must be set to the on position Reserved SettingSwitch S1-5 Asynchronous/Sync Operation Switches S1-6 and S1-7 System Clock ModeConfiguring DIP switch S2 S1-8 SettingS2 Summary Table Position Function Factory Default Switches S2-3 Response to Local Line Loop Requests from DTE Switch S2-2 Front Panel Switch DisableS2-2 Setting Switches S2-4 and S2-5 Not AssignedS2-7 Activation Setting Switch S2-6 Response to RDL Request from DTESwitch S2-7 Compatability Mode Switch S2-8 Not AssignedInstallation Connecting the Twisted Pair InterfaceConnecting the Model 1082 V.35 to a DTE Device Connecting the Model 1082 V.35 Serial InterfaceConnecting the Model 1082 V.35 to a DCE Device Connecting the Model 1082 X.21 Serial Interface Connecting the Model 1082 X.21 to a DCE or DTE DeviceConnecting the Model 1082 to X.21 DTE or DCE Opening the CaseConnecting Power Universal AC Power 100-240VACDC Power To Power Supply JackTo -48VDC VinSourceLED Status Monitors POWER-UPOperation DSL LinkTest Modes Local Line Loopback LLBRemote Digital Loopback RDL Local Remote RDL initiatedUsing the V.52 BER test pattern generator Appendix a DiagnosticsLED Status Indicators Transmission FormatTemperature Range ConnectorsPower DimensionsAppendix B Model # DescriptionAppendix C Female ConnectorPin # Signal InterfaceAppendix D Sub-15 Female ConnectorDTE /DCE Orientation Appendix E

1082/144, 1082 specifications

The Patton Electronics 1082 and 1082/144 are advanced networking devices specifically designed for various telecommunication applications, highlighting their versatility in managing data transmission over different mediums. These devices, manufactured by Patton Electronics, a company known for its reputable and innovative solutions in the telecommunications industry, provide reliable connectivity and functionality essential for modern networking environments.

The Patton 1082 series is primarily a line of Ethernet over T1/E1 compact devices. These innovative tools allow users to extend Ethernet networks over traditional T1 or E1 circuits, addressing the growing demand for seamless data transfer in businesses without the need for extensive infrastructure upgrades. The ability to bridge local area networks (LANs) and wide area networks (WANs) with efficiency makes the 1082 an attractive choice for many enterprises.

A standout feature of the 1082 and its 1082/144 variant is their reliability and durability. Both units are designed to function consistently in various operational environments, making them suitable for installation in remote or harsh conditions. This reliability is critical for businesses that rely on constant data availability.

The devices offer enhanced security features with support for Advanced Encryption Standard (AES) capabilities, ensuring that data transmitted over connections remains secure from potential threats. With built-in diagnostics and performance monitoring tools, network administrators can easily assess the health of their networks and address any issues proactively.

Another significant characteristic of these units is their flexibility. The 1082 supports a variety of network configurations, making it adaptable to different types of installations. Users can configure the device to support VLAN tagging, allowing for improved network segmentation and management.

Both models support various Ethernet speeds, with the 1082/144 variant capable of handling a total of 144 T1/E1 multiplexed signals, which is particularly beneficial for organizations with high data transmission needs. The dual LAN ports ensure redundancy and high availability, a necessary feature for mission-critical applications.

Overall, the Patton Electronics 1082 and 1082/144 are robust solutions for businesses looking to enhance their networking capabilities. With their mix of reliability, security features, and flexible configurations, these devices represent a top choice for anyone seeking to optimize their data communication strategies.
Top Page Image Contents