Patton electronic 1082/144 S2-1 Activation Description, Switch S2-2 Front Panel Switch Disable

Page 13

Switches S2-1: 19.2 kbps or 144* kbps Synchronous Rate Enable

Use switch S2-1 to allow the Model 1082 and Model 1082/144 to operate at the 19.2 kbps synchronous data rate, or to enable the Model 1082/144 to operate at the 144* kbps synchronous data rate.

S2-1

Activation

Description

 

 

 

Off

Disabled

Synchronous data rate is 32–128kbps as

 

 

defined by switches S1-1 and S1-2

 

 

 

On

Enabled

Model 1082 operates at synchronous 19.2 kbps

 

 

data rate (see note).The Model 1082/144 operates

 

 

at 144 kbps synchronous data rate (see note)

 

 

 

Note To operate at 19.2 kbps or 144 kbps, set switches S1-1 and S1-2 to the OFF position and switch S2-1 to ON (see section “Configur- ing DIP Switch S1” on page 9).

Switch S2-2: Front Panel Switch Disable

Use switch S2-2 to enable or disable the front panel toggle switches.

S2-2

Setting

 

 

On

Disable the front panel switches

Off

Enable the front panel switches

 

 

Switches S2-3: Response to Local Line Loop Requests from DTE

Use switch S2-3 to enable Local Line Loopback from the local DTE inter- face (See “Local Line Loopback (LLB)” on page 22).

S2-3

Activation

Description

 

 

 

Off

Disabled

Ignore Line Loop Back request from DTE interface

ON

Enabled

Respond to Line Loop Back request from DTE

 

 

interface

 

 

 

Switches S2-4 and S2-5: Not Assigned

*144 kbps data rate is only available on the Model 1082/144.

19.2 kbps rate is available on all Model 1082 series modems except for the 1082/144.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User Manual Table of Contents Model 1082 Specifications FCC Information Warranty InformationCE Notice Tel 301 Mailsupport@patton.com ServiceGeneral Information FeaturesDescription HTTP/HTML Management 1082 Snmp Management SolutionsConfiguring the Hardware DIP Switches ConfigurationS1 Summary Table Position Function Factory Default Configuring DIP Switch S1Switch S1-3 Data Set Ready during Line Loopback Test Switches S1-1 and S1-2 Data RateS1-3 Setting S1-1 S1-2 Sync Data Rate Async. Data RateSwitch S1-5 Asynchronous/Sync Operation Switch S1-4 Must be set to the on position Reserved SettingS1-5 Setting Switches S1-6 and S1-7 System Clock ModeConfiguring DIP switch S2 S1-8 SettingS2 Summary Table Position Function Factory Default S2-2 Setting Switch S2-2 Front Panel Switch DisableSwitches S2-3 Response to Local Line Loop Requests from DTE Switches S2-4 and S2-5 Not AssignedSwitch S2-7 Compatability Mode Switch S2-6 Response to RDL Request from DTES2-7 Activation Setting Switch S2-8 Not AssignedConnecting the Twisted Pair Interface InstallationConnecting the Model 1082 V.35 to a DTE Device Connecting the Model 1082 V.35 Serial InterfaceConnecting the Model 1082 V.35 to a DCE Device Connecting the Model 1082 X.21 to a DCE or DTE Device Connecting the Model 1082 X.21 Serial InterfaceOpening the Case Connecting the Model 1082 to X.21 DTE or DCEUniversal AC Power 100-240VAC Connecting PowerTo Power Supply JackTo -48VDC VinSource DC PowerOperation POWER-UPLED Status Monitors DSL LinkLocal Line Loopback LLB Test ModesLocal Remote RDL initiated Remote Digital Loopback RDLUsing the V.52 BER test pattern generator LED Status Indicators DiagnosticsAppendix a Transmission FormatPower ConnectorsTemperature Range DimensionsModel # Description Appendix BPin # Signal Female ConnectorAppendix C InterfaceAppendix D Sub-15 Female ConnectorDTE /DCE Orientation Appendix E

1082/144, 1082 specifications

The Patton Electronics 1082 and 1082/144 are advanced networking devices specifically designed for various telecommunication applications, highlighting their versatility in managing data transmission over different mediums. These devices, manufactured by Patton Electronics, a company known for its reputable and innovative solutions in the telecommunications industry, provide reliable connectivity and functionality essential for modern networking environments.

The Patton 1082 series is primarily a line of Ethernet over T1/E1 compact devices. These innovative tools allow users to extend Ethernet networks over traditional T1 or E1 circuits, addressing the growing demand for seamless data transfer in businesses without the need for extensive infrastructure upgrades. The ability to bridge local area networks (LANs) and wide area networks (WANs) with efficiency makes the 1082 an attractive choice for many enterprises.

A standout feature of the 1082 and its 1082/144 variant is their reliability and durability. Both units are designed to function consistently in various operational environments, making them suitable for installation in remote or harsh conditions. This reliability is critical for businesses that rely on constant data availability.

The devices offer enhanced security features with support for Advanced Encryption Standard (AES) capabilities, ensuring that data transmitted over connections remains secure from potential threats. With built-in diagnostics and performance monitoring tools, network administrators can easily assess the health of their networks and address any issues proactively.

Another significant characteristic of these units is their flexibility. The 1082 supports a variety of network configurations, making it adaptable to different types of installations. Users can configure the device to support VLAN tagging, allowing for improved network segmentation and management.

Both models support various Ethernet speeds, with the 1082/144 variant capable of handling a total of 144 T1/E1 multiplexed signals, which is particularly beneficial for organizations with high data transmission needs. The dual LAN ports ensure redundancy and high availability, a necessary feature for mission-critical applications.

Overall, the Patton Electronics 1082 and 1082/144 are robust solutions for businesses looking to enhance their networking capabilities. With their mix of reliability, security features, and flexible configurations, these devices represent a top choice for anyone seeking to optimize their data communication strategies.
Top Page Image Contents