Patton electronic 2158A, 2168A user manual Configuration, Configuring the Hardware DIP Switches

Page 16

4.0 CONFIGURATION

The CopperLink Models 2168A and 2168A/TB45 have an eight-position DIP switch for configuring the unit for a wide variety of applications. This section describes switch locations and explains the different configura- tions. The Model 2158A does not include dip switches.

4.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small flat-tip screwdriver, remove the protective cover located on the underside of the CopperLink Ethernet Extender (see Figure 8).

 

er p

o C

nk Li

 

 

CopperLink™

Ethernet

Extender

Figure 8. Removing protective cover

Figure 9 on page 16 shows the orientation of the DIP switches in the On and Off positions.

SW

SW

Figure 9. Models 2168A and 2168A/TB45 DIP switch orientation

16

Image 16 Contents
User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Warranty Information Safety ComplianceCompliance EMC ComplianceService Radio and TV Interference FCC PartCE Declaration of Conformity Authorized European RepresentativeSafety When Working with Electricity Within 10 feet 3 meters of the device, shall beFeatures General InformationDescription Typical applicationInstallation Unit InstallationConnecting the TWISTED-PAIR Line Interface Grounding the Copperlink Ethernet ExtenderNo connection Model 2168A Model 2158A Connecting the ferrite clamp to the terminal block Model 2168A/TB45Connecting the 10/100BASE-T Ethernet Interface Do not connect power to the DC Mains at this time Connecting PowerConfiguration Configuring the Hardware DIP SwitchesConfiguring DIP Switch SW Operation Power UPFront Panel LED Status Monitors Description LEDLED is solid yellow and the CopperLink Link LED LED Status Indicators Appendix aLAN Connection Transmission LinePower Supply Temperature RangeDimensions HumidityAppendix B Patton Model # DescriptionPower Supplies Appendix C 10/100BASE-T InterfaceRJ-45 Copperlink InterfaceSymm Line Rate Distance in feet km Appendix DAsymm Line Rate DS/US Distance in feet km Page Page Copyright Patton Electronics Company All Rights Reserved