Patton electronic 2168A Radio and TV Interference FCC Part, CE Declaration of Conformity, Service

Page 5

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manu- facturer's instructions—may cause interference to radio and television reception. This equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the specifica- tions in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection from such interference in a commercial installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by disconnecting the cables, try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re- orienting the receiving antenna, and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

We certify that the apparatus described above conforms to the require- ments of Council Directive 2004/108/EC on the approximation of the laws of the member states relating to electromagnetic compatibility; and Council Directive 2006/95/EC on the approximation of the laws of the member states relating to electrical equipment designed for use within certain voltage limits.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Tel: +1 (301) 975-1007

Email: support@patton.com

URL: http://www.patton.com

5

Image 5 Contents
User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Safety Compliance Warranty InformationCompliance EMC ComplianceRadio and TV Interference FCC Part ServiceCE Declaration of Conformity Authorized European RepresentativeWithin 10 feet 3 meters of the device, shall be Safety When Working with ElectricityGeneral Information FeaturesTypical application DescriptionUnit Installation InstallationGrounding the Copperlink Ethernet Extender Connecting the TWISTED-PAIR Line InterfaceNo connection Model 2168A Model 2158A Model 2168A/TB45 Connecting the ferrite clamp to the terminal blockConnecting the 10/100BASE-T Ethernet Interface Connecting Power Do not connect power to the DC Mains at this timeConfiguring the Hardware DIP Switches ConfigurationConfiguring DIP Switch SW Front Panel LED Status Monitors Power UPOperation LED is solid yellow and the CopperLink Link LED LEDDescription Appendix a LED Status IndicatorsLAN Connection Transmission LineTemperature Range Power SupplyDimensions HumidityPatton Model # Description Appendix BPower Supplies 10/100BASE-T Interface Appendix CRJ-45 Copperlink InterfaceAsymm Line Rate DS/US Distance in feet km Appendix DSymm Line Rate Distance in feet km Page Page Copyright Patton Electronics Company All Rights Reserved