Patton electronic 1180/35 user manual General Information, Features, Description, Configuration

Page 3

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected by Patton's qualified technicians. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Technical Support at (301) 975-1007.

2.1FEATURES

•Communicates full duplex over a single multimode fiber

•Synchronous data rates to 256 Kbps

•Hardware and software flow control support

•Internal, external or received recover clock

•Distances to 1.5 miles (over 64 Kbps)

•Distances to 3 miles (64 Kbps and under)

•ST or SMA fiber connectors

•V.35 DTE interface with female M/34

•Local and remote loopback diagnostics

•Tri-State front panel LED indicators

•Made in USA

2.2DESCRIPTION

The Model 1180/35 Single Fiber V.35 Short Range Modem accomplishes full duplex, point-to-point V.35 communication over a single multimode fiber. Supporting synchronous data rates up to 256 Kbps, the Model 1180/35 automatically adapts to hardware or software flow control, and can be set for internal, external or received recover clocking.

The Model 1180/35 features extended data rate circuitry that allows for single fiber distances up to 1.5 miles at data rates above 64 kbps, or 3 miles at data rates below 64 kbps. Both local and remote loopback tests can be activated from the front panel, or from the V.35 interface. The Model 1180/35 front panel incorporates LED indicators for TD, RD, RTS, CD and power.

Optical fiber may be connected to the Model 1180/35 using an ST or SMA type interface. The V.35 DTE interface on the Model 1180/35 is a female M/34 connector.

3.0 CONFIGURATION

The Model 1180/35 uses an eight switch package that allow s configuration to a wide range of synchronous applications. Because all eight switches are externally accessible (see Figures 1 and 2, below), there is no need to open the Model 1180/35's case for configuration.

FRONT

REAR

Figure 1. Switch Locations Underneath Model 1180/35

ON

OFF

Figure 2. Close-up of 1180/35 DIP Wwitch Package Showing OFF/ON Positions

3.1 DETAILED SWITCH SETTINGS

The Model 1180/35’s configuration switches set data rate (distance), sync clock source, and DTE control of the RDL and LAL test modes. The table on the following page summarizes the default switch settings for the Model 1180/35. Following this table is a detailed description of each switch function.

3

4

Page 2 Page 4
Image 3
Page 2 Page 4
Contents User Manual CE Notice Warranty InformationService Radio and TV InterferenceGeneral Information FeaturesConfiguration Detailed Switch SettingsS1 Summary Table Operation InstallationSingle Fiber Connection V.35 ConnectionRemote Loopback POWER-UP / SynchronizationLoopback Test Modes Local LoopbackSymptom Appendix a Troubleshooting Problemsolution POWER-DOWN1180/35s are not communicating Symptom Problem SolutionAppendix B Patton Model 1180/35 Specifications Appendix C Interface PIN Assignment Model 1180/35 Female M/34 Connector Pin # Signal

1180/35 specifications

The Patton Electronic 1180/35 is a versatile and robust device designed for a variety of telecommunication applications. Known for its reliability, the 1180/35 is particularly adept in environments that demand low power consumption and high performance. One of its standout features is its ability to support multiple communication protocols, making it an excellent choice for businesses looking to streamline their operations and minimize the need for additional hardware.

A key technology employed in the 1180/35 is its advanced digital signal processing (DSP). This technology enhances call quality and optimizes voice clarity, which is crucial for any organization relying on telephony for customer relations. With DSP, the device can effectively eliminate background noise and minimize latency, ensuring a seamless communication experience.

The 1180/35 also supports various interfaces, including Ethernet and serial connections, providing flexibility for integration into existing networks. This broad compatibility allows users to easily integrate the device with their current setup, making it a cost-effective solution for upgrading communication systems without overhauling entire infrastructures.

In addition to its connectivity features, the Patton 1180/35 is equipped with built-in security protocols. This includes encryption capabilities that protect sensitive voice and data traffic from potential eavesdropping or interception. As cybersecurity becomes ever more critical in communication technology, the inclusion of these security features makes the 1180/35 an attractive option for businesses concerned about data integrity.

Another notable characteristic of the 1180/35 is its compact design, which enables easy placement in office environments. Despite its small footprint, the device is rugged and designed to withstand the demands of everyday use, ensuring longevity and durability.

Power efficiency is another remarkable feature. The 1180/35 operates with low power consumption, allowing for reduced operational costs while also being environmentally friendly. This aspect is increasingly appealing to businesses looking to reduce their carbon footprint while maintaining high performance in their communication tools.

In summary, the Patton Electronic 1180/35 stands out in the telecommunications landscape due to its advanced features, including digital signal processing, versatile connectivity options, built-in security, compact design, and power efficiency. These characteristics make it an ideal choice for modern businesses seeking reliable and effective communication solutions. It is a product that combines quality with practicality, poised to meet the needs of various communication scenarios.
Top Page Image Contents