Patton electronic 1052 user manual Operation, Power-Up, LED Status Monitors, Led

Page 15

5.0 OPERATION

Once the Model 1052 is properly configured and installed, it should oper- ate transparently. This sections describes power-up, reading the LED status monitors, and using the built-in loopback test modes.

5.1 POWER-UP

Before applying power to the Model 1052, read section 4.3, “Power Con- nection” on page 13 to ensure that the unit is connected to the appropri- ate power source.

5.2 LED STATUS MONITORS

The Model 1052 features five side panel LEDs (see Figure 7). Table 2 describes the function of each LED.

 

Figure 7. Model 1052 side panel LEDs

 

Table 2: LED descriptions

 

 

LED

Description

 

 

TXD

(Active: Green) When lit, indicates data transmission.

RXD

(Active: Green) When lit, indicates data transmission.

 

 

DSL LINK

(Active: Green) When lit, indicates that the end-to-end DSL

 

framer link is up, signifying that the link across the DSL span

 

is active. The DSL Link LED is off when the link is down.

 

 

NS

(Active: Yellow) When the No Signal LED is lit, it indicates

 

that the local Model 1052 is not connected with the remote

 

Model 1052

 

 

ER

(Active: Red) Flashing red indicates that there are CRC errors

 

on the DSL (framer) side if the DSL Link is active. ER flashes

 

once to indicate a CRC error during normal operation

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Manual Model 1052 Specifications Table of ContentsTemperature Range Altitude Humidity Weight Line Interface Warranty Information FCC InformationCE Notice Tel 301 Mailsupport@patton.com ServiceFeatures General InformationDescription Configuring the Hardware DIP Switches ConfigurationS1 Summary Table Position Function Factory Default Configuring DIP Switch S1S1-3 Setting S1-4 SettingS1-1 S1-2 Sync Data Rate Async. Data Rate S1-8 Other Model 1052 for receive recover clock modeConfiguring DIP switch S2 Position Function Factory DefaultS2-6 S2-3Connecting the Twisted Pair Interface InstallationConnecting the Connecting the Model 1052/A RS-232 Connecting the Model 1052/A RS-232 to a DTE DevicePower Connection Patton Electronics Technical support at Universal AC Power 100-240 VACDC Power To Power Supply JackTo -48VDC VinSourceLED POWER-UPOperation LED Status MonitorsPower Control SignalsLED Status Indicators ConnectorsHumidity Temperature RangeWeight AltitudeModel # Description Appendix BRS-232 Interface DB-25 Female ConnectorPin # Signal Appendix CCopyright Patton Electronics Company All Rights Reserved

1052 specifications

The Patton Electronic 1052 is a versatile and robust device designed primarily for telecommunication applications. Known as a SmartNode, this unit is celebrated for its ability to seamlessly bridge traditional circuit-switched telecom systems and modern IP-based networks. It serves as an excellent solution for enterprises looking to maximize their existing infrastructure while transitioning to Voice over Internet Protocol (VoIP) technologies.

One of the standout features of the Patton Electronic 1052 is its support for simultaneous voice channels. This device can handle multiple calls, making it highly efficient for businesses that require reliable communication capabilities. With its ability to support both analog and digital signaling, the SmartNode can connect to various endpoints, including traditional telephony equipment and modern IP phones.

The device leverages advanced technologies such as SIP trunking, which allows for the efficient handling of voice calls over the internet. By converting traditional voice signals into data packets, the 1052 reduces costs associated with long-distance calls and improves overall call quality. This feature is particularly beneficial for organizations looking to optimize their communication expenses.

Another remarkable characteristic of the Patton Electronic 1052 is its built-in security features. It includes robust encryption protocols to safeguard voice data, ensuring that communications remain private and secure from potential threats. The device also offers comprehensive management tools, enabling IT administrators to monitor call traffic and troubleshoot any issues that might arise.

Furthermore, the 1052 is compatible with various telecom standards, which means it can easily integrate into existing systems without requiring significant changes. Its user-friendly interface simplifies the configuration process, allowing for quick setup and deployment.

In terms of reliability, the Patton Electronic 1052 is designed for high availability. It incorporates failover mechanisms to maintain connectivity even in the event of network disruptions. This ensures that businesses can continue to operate smoothly without interruption in communication services.

In summary, the Patton Electronic 1052 stands out as a powerful communications solution, offering a blend of traditional telephony and modern VoIP technologies. With its multi-channel capabilities, security features, and ease of integration, it is an ideal choice for enterprises aiming to enhance their telecommunication systems while preparing for the future of connectivity.
Top Page Image Contents