Patton electronic 1052 user manual Warranty Information, FCC Information, CE Notice

Page 4

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1052 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics spe- cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Patton Technical Support.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User Manual Table of Contents Model 1052 SpecificationsTemperature Range Altitude Humidity Weight Line Interface FCC Information Warranty InformationCE Notice Service Tel 301 Mailsupport@patton.comGeneral Information FeaturesDescription Configuration Configuring the Hardware DIP SwitchesConfiguring DIP Switch S1 S1 Summary Table Position Function Factory DefaultS1-4 Setting S1-3 SettingS1-1 S1-2 Sync Data Rate Async. Data Rate Other Model 1052 for receive recover clock mode Configuring DIP switch S2Position Function Factory Default S1-8S2-3 S2-6Installation Connecting the Twisted Pair InterfaceConnecting the Model 1052/A RS-232 to a DTE Device Connecting the Connecting the Model 1052/A RS-232Power Connection Universal AC Power 100-240 VAC DC PowerTo Power Supply JackTo -48VDC VinSource Patton Electronics Technical support atPOWER-UP OperationLED Status Monitors LEDControl Signals LED Status IndicatorsConnectors PowerTemperature Range WeightAltitude HumidityAppendix B Model # DescriptionDB-25 Female Connector Pin # SignalAppendix C RS-232 InterfaceCopyright Patton Electronics Company All Rights Reserved

1052 specifications

The Patton Electronic 1052 is a versatile and robust device designed primarily for telecommunication applications. Known as a SmartNode, this unit is celebrated for its ability to seamlessly bridge traditional circuit-switched telecom systems and modern IP-based networks. It serves as an excellent solution for enterprises looking to maximize their existing infrastructure while transitioning to Voice over Internet Protocol (VoIP) technologies.

One of the standout features of the Patton Electronic 1052 is its support for simultaneous voice channels. This device can handle multiple calls, making it highly efficient for businesses that require reliable communication capabilities. With its ability to support both analog and digital signaling, the SmartNode can connect to various endpoints, including traditional telephony equipment and modern IP phones.

The device leverages advanced technologies such as SIP trunking, which allows for the efficient handling of voice calls over the internet. By converting traditional voice signals into data packets, the 1052 reduces costs associated with long-distance calls and improves overall call quality. This feature is particularly beneficial for organizations looking to optimize their communication expenses.

Another remarkable characteristic of the Patton Electronic 1052 is its built-in security features. It includes robust encryption protocols to safeguard voice data, ensuring that communications remain private and secure from potential threats. The device also offers comprehensive management tools, enabling IT administrators to monitor call traffic and troubleshoot any issues that might arise.

Furthermore, the 1052 is compatible with various telecom standards, which means it can easily integrate into existing systems without requiring significant changes. Its user-friendly interface simplifies the configuration process, allowing for quick setup and deployment.

In terms of reliability, the Patton Electronic 1052 is designed for high availability. It incorporates failover mechanisms to maintain connectivity even in the event of network disruptions. This ensures that businesses can continue to operate smoothly without interruption in communication services.

In summary, the Patton Electronic 1052 stands out as a powerful communications solution, offering a blend of traditional telephony and modern VoIP technologies. With its multi-channel capabilities, security features, and ease of integration, it is an ideal choice for enterprises aiming to enhance their telecommunication systems while preparing for the future of connectivity.
Top Page Image Contents