CE Notice, Service, Features | Patton electronic 1004ABRC specs

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight pre- paid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping contain- er. This number may be obtained from Patton Electronics Technical Support:

Tel: (301) 975-1007

Email: support@patton.com.

www:http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1004ABRC. Technical Service hours: 8AM to 5PM EST,

Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions during installation or use of the 1004ABRC, contact Patton Electronics Technical Support at (301) 975-1007.

2.1FEATURES

•Convenient rack card features two short range modems

•Data rates to 115.2 Kbps

•Multi-point Operation on Data Transitions -- No need for Hardware Control Signals

•Supports up to 50 multipoint drops in a polling environment

•Passes transmit & receive data

•Variable high/low impedance settings

•Operates with or without local “echo”

•Features 6 easy-to-read LEDs

•Silicon Avalanche Diode surge protection

•Fits conveniently in Patton’s rack chassis

2.2DESCRIPTION

The Model 1004ABRC high speed, multipoint short range modem rack card is a dual rack card incorporating two short range modems. Both units support asynchronous data rates to 115.2 Kbps over 1 or 2 twisted pairs and support distances to 4000 feet (19 AWG @19.2 kbps). In addition, Model 1004ABRC’s unique data control feature allows it to be used in multi-point environments without the use of hard- ware control signals.

The Model 1004ABRC can handle up to 50 terminal drops in a multipoint polling environment. Using transitions on the data line to handle line contention, the Model 1004ABRC can be used in environ- ments that need multi-port bus contention, but do not have control sig- nals such as RTS or DTR. The Model 1004ABRC may be configured for high or low impedance operation, and the unit can operate with or without “echo”.

Filling one function card slot on Patton’s Model 1000R16 rack chassis, the Model 1004ABRC is available with RJ-11 or RJ-45 rear interface cards. For workgroup and desktop communications, the Model 1004ABRC also fits in Patton’s 2, 4 and 8 slot ClusterBoxes™. The combination of rack mount, ClusterBox™ and self-powered units provides a completely integrated “networking” solution.