Patton electronic MODEL 2707/I Appendix a, Network Data Rate, Network Connector, Line Coding

Page 20

APPENDIX A

G.703 SPECIFICATIONS

A.1 NETWORK DATA RATE

2.048 Mbps

A.2 NETWORK CONNECTOR

RJ-48C/Dual Coax BNC

A.3 NOMINAL IMPEDANCE

75/120 ohm

A.4 LINE CODING

Selectable AMI or HDB3

A.5 LINE FRAMING

G.703 (Unframed)

A.6 CLOCKING

Internal or Network (Receive Recover)

A.7 DISTANCE

Maximum 6,000 ft (1.6 km) On 24 AWG cable

20

Image 20

Contents User Manual Warranty Information ConfigurationInstallation SpecificationsFactory Replacement Parts and Accessories Warranty Information ServiceRadio and TV Interference CE NoticePage Description FeaturesGeneral Information PPP Operational Background ApplicationsModel 2707/I Model 2707/C Router Internet Ethernet LANFront Rear ConfigurationDIP Switch Configurations Switch S1 settings Switch Description SettingSW1-1 Line Coding HDB3 default SW1-1 Line EncodingPage Installation Connecting to the G.703 Network and Ethernet LANConnecting Dual Coaxial Cable 75 ohm to the G.703 Network FromConnecting the Twisted Pair 120 ohm to the G.703 Network Network Signal PIN#Signal Name Connecting the 10Base-T Ethernet port to a PC DTE10Base-T Port 10Base-T Hub RJ-45 Pin No Connecting the 10Base-T Ethernet Port to a Hub10Base-T Port 10Base-T DTE RJ-45 Pin No To Power Supply Jack LED Status Monitors POWER-UPOperation LED Device Operating Line Loopback LL703 NTU Model 2707/I Mbps G.703 Network Connector Appendix aNetwork Data Rate Nominal ImpedanceDiagnostics IndicatorsAppendix B DTE InterfacePower Supply TemperatureDimensions HumidityAppendix C Patton Model # DescriptionCopyright Patton Electronics Company All Rights Reserved