Patton electronic 1025S Radio and TV Interference, CE Notice, Service, Monday through Friday

Page 2

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1025 components to be free from defects, and will—at our option—repair or replace the prod- uct should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modifi- cation. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequen- tial damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 1025 generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and tele- vision reception. The Model 1025 has been tested and found to com- ply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection from such interference in a commercial installation. However, there is no guarantee that interfer- ence will not occur in a particular installation. If the Model 1025 does cause interference to radio or television reception, which can be deter- mined by disconnecting the RS-232 interface, the user is encouraged to try to correct the interference by one or more of the following mea- sures: moving the computing equipment away from the receiver, re- orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Services.

1.3 SERVICE

All warranty and nonwarranty repairs must be returned freight pre- paid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping contain- er. This number may be obtained from Patton Electronics Technical Services at:

telephone: (301) 975-1007

email: support@patton.com

web address: http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 1025. Technical Service hours: 8AM to 5PM EST,

Monday through Friday.

1

2

Image 2
Contents Model 1025 and 1025S CE Notice ServiceRadio and TV Interference Telephone 301 Email support@patton.comDescription FeaturesSwitch Locations Switches 1 and 2 Transmit Clock Switch SettingsSwitch Summary Table Switch 3 RTS/CTS DelaySignal PIN# Color Twisted Pair Connection Using RJ-11 or RJ-45Signal Twisted Pair Connection Using Terminal BlocksXMT RCV Connection to the RS-232 Interface Connection to a DTE DeviceWeight 2 oz SpecificationsTemperature Range 0-60C32-140F Connection to a DCE DeviceRS-232 PIN Configurations Direction DCE Standard Setting