Patton electronic MODEL 2126 user manual Server Name

Page 7

3)In the Specify Print Server Address Screen, select “Search Network for Print Servers” and press [ENTER]. This will take you to the Selected Networks screen.

4)The Selected Networks screen allows you to choose the networks you want UCONNECT to search in order to locate the Print Server. Use the arrow keys to scroll between lines. Use the [esc] key to select and deselect networks. Press [ENTER] to update the file with your selections and go to the Select Required Search Method screen.

5)The Select Required Search Method screen allows you to specify the search path(s) that UCONNECT takes in order to locate the Print Server. The first option will route the search through the file sever your workstation is connected to. This will limit the search. The second option will search all selected networks in a “broadcast” manner. (The default is both methods.) Use the arrow keys to scroll between lines. Use the [esc] key to select and deselect search methods. Press [ENTER] to update the file with your selections and go to the next screen.

11

6)The Start Scan for Print Servers screen allows you to initiate the scan based upon the criteria you have chosen. Select an option using [ENTER]. Choosing “yes” will begin the search. Choosing “no” will take you back to the Main Menu.

Once your search has begun, UCONNECT will provide you with screens updating you on the progress of the search. If you have chosen to search through the local file server, you will see a display- only screen that looks like the image below:

Routing Search Through

Server Name

Searching on Network

xxxxxxxxxxx

Patton Print Servers Found

:xx

Networks Searched

:xx

Networks to Search

:xx

 

 

If you have chosen the broadcast search option, you will then see a display-only screen that looks like the following image:

Using Broadcast Search

 

Searching on Network

xxxxxxxxxxx

Patton Print Servers Found

:xx

Networks Searched

:xx

Networks to Search

:xx

 

 

(continued)

12

Image 7
Contents Model Novell Operation Warranty InformationInstallation General InformationChecking The Supplied Parts FeaturesPhysical Connection and Operation What if a status page does not print after 15 30 seconds? Installing Uconnect on a WorkstationUsing Pconsole Locating the Print Server on the Network Uconnect CommandsServer Name General Configuration Configuration within Novell using UconnectPersonal Netware Configuration Novell ConfigurationAdvanced Novell Configuration 4 TCP/IP ConfigurationTesting within Novell using Uconnect Reset to Factory DefaultsExit Upgrading within Novell Troubleshooting within NovellPrinting within Novell Nprint testfile.doc PS=PESERV Queue=TESTArp -S ether IPaddress NICaddress where Novell SpecificLocating the Print Server on the TCP/IP Network Assigning the Internet AddressPersonal GeneralNovell TcpipSET PU = no PUT IMAGE.BIN Interface Connections Specifications