Patton electronic 2151 Appendix a, LAN Connection, Transmission Line, LED Status Indicators

Page 16

APPENDIX A

SPECIFICATIONS

A.1 LAN CONNECTION

•Two shielded RJ-45, 10/100Base-T, IEEE 802.3 Ethernet

•CopperLINK Connection: Shielded RJ-45

A.2 TRANSMISSION LINE

Two-wire unconditioned twisted pair.

A.3 COPPERLINK LINE RATE AND COPPERLINK DISTANCE

•Line Rate: 15/15 Mbps, upstream/downstream. Additional five line rates are available via DIP switch settings.

•Distance: 5,750 ft (1.7 km) at 1 Mbps upstream/4 Mbps downstream

Note Distances depend on selected line rate and line conditions. See Appendix D on page 19 for details.

A.4 LED STATUS INDICATORS

•Power (Green)

•CopperLINK: Link (Green)

•Ethernet: Link (Green) & Activity (Flashing Green)

•Remote (Green)

•Local (Green)

A.5 POWER SUPPLY

External AC and DC options:

•AC: 120 VAC, 220 VAC, and UI (120–240 VAC)

•DC: 12 VDC, 24 VDC and 48 VDC

•Power consumption: 860mA at 5V

A.6 TEMPERATURE RANGE

0–40°C

A.7 HUMIDITY

Up to 90% non-condensing.

A.8 DIMENSIONS

1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm)

16

Image 16

Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Warranty Information Regulatory InformationPstn Radio and TV Interference FCC PartCE Declaration of Conformity ServiceAuthorized European Representative Safety When Working with Electricity Page General Information FeaturesDescription Installation Typical applicationConnecting the TWISTED-PAIR Line Interface Model 2151 standalone rear panelConnecting the 10/100BASE-T Ethernet Interface Model 2151 RJ-45 twisted pair line interfaceConfiguration Connecting PowerConfiguring the Hardware DIP Switches Front Rear Power UP Configuring DIP Switch S1Operation Front Panel LED Status Monitors LEDLED Status Indicators Power SupplyTemperature Range DimensionsAppendix B Base Models10/100BASE-T Interface Appendix CCopperlink Interface Appendix D Per secondCopyright Patton Electronics Company All Rights Reserved