Sanyo VM4500 manual Net Guard, PCS Vision Connection Status and Indicators

Net Guard

When you first connect to the Web, the Net Guard will appear to confirm that you want to connect. This feature helps you avoid accidental connections. You can disable the Net Guard in the future by selecting Always Auto-Connectwhen the Net Guard is displayed.

To change your Net Guard settings:

1.Press to access the main menu.

2.Select Settings and press .

3.Select PCS Vision and press .

4.Select Net Guard and press .

5.Select On or Off and press .

On to activate the Net Guard.

Off to deactivate the Net Guard.

Note: When enabled, the Net Guard appears only once per session. The Net Guard does not appear if the phone is merely re-connecting due to a time-out.

PCS Vision Connection Status and Indicators

Your phone’s display lets you know the current status of your

PCS Vision connection through indicators which appear at the top of the screen. The following symbols are used:

Your PCS Vision connection is active (data is being transferred). Incoming voice calls go directly to voicemail; outgoing voice calls can be made, but the PCS Vision connection will be dormant.

Your PCS Vision connection is dormant (no data is being sent or received). Though not currently active, when dormant the phone can restart an active connection quickly; voice calls can be made and received.

Your phone is not currently able to access PCS Vision service features.

If no indicator appears, your phone does not have a current

PCS Vision connection. To launch a connection, see “Launching a PCS Vision Connection” on the previous page.

Section 3: Using PCS Service Features

3B: PCS Vision 179