Sanyo VM4500 manual Restarting the Ready Link Service, Setting Ready Link Guard

6.Select the contact and press .

– or –

Select the group and press , select an option, and press .

Assign to assign the selected group as a speed dial.

Details to display the group details. You can select the entry from the group list.

To use Speed Dial for a PCS Ready Link entry:

From standby mode, press the appropriate key and press and

hold .

Restarting the Ready Link Service

To restart the PCS Ready Link service:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Ready Link and press .

4.Select Restart R-Linkand press .

Setting Ready Link Guard

This feature enables you to display the warning message when you cannot receive PCS Ready Link calls. The warning message appeares when you are launching the Web or sending/uploading your pictures/videos.

To set the Ready Link Guard:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Ready Link and press .

4.Select R-Link Guard and press . (A message will appear.)

5.Press OK (left softkey) to continue.

6.Select On and press .

To deactivate this feature, select Off during step 6 above.

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 43