Sanyo VM4500 manual Changing the Display Font Size of a Message

Lock to lock the message. Locked messages will not be erased automatically. To unlock the message, select Unlock and

press .

Font Size to change the font size from Small or Normal.

Save to Ph. Book to save the phone number, email address, and

URLs. Select a data category and press to save.

Go to Phone Book to go to the Contacts list (if applicable).

Compose New to compose a new message. (See page 184 to compose a message.)

Erase to erase the message.

Changing the Display Font Size of a Message

After you display a Message in the Inbox, Sent, or your defined folder, press Options (right softkey) to display message options.

To adjust the display font size:

1.Select Font Size and press .

2.Select Small or Normal and press .

Prepending a Phone Number From a Message

After you display a Message in the Inbox, Sent, or your defined folder,

press to display message options.

To add a prefix to a phone number:

1.Select Prepend and press .

2.Enter the digits or pauses (see below) you want to add to the

number. If you want to save the number, press and select the Save Phone# option. If not, the changes only apply to the current call.

3.To select an option, highlight it and press .

Call to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to store the phone number in your Contacts Directory.

H Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 24.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 24.)

Section 3: Using PCS Service Features

3B: PCS Vision 188