Sanyo VM4500 manual Making a PCS Ready Link Call Group Call, When you are finished, press

5.When you are finished, press .

Note: When neither party has the floor during a PCS Ready Link call,

“Floor is open.” appears on the display. If no one takes the floor for 20 seconds, the PCS Ready Link call ends automatically.

Tip: If you pressor during step 3 on the previous page, you can make a standard voice call.

Making a PCS Ready Link Call (Group Call)

You can make a PCS Ready Link call to all members in a Group entry, which you have in your PCS Ready Link List. You can communicate with up to five members at a time.

To place a PCS Ready Link Group Call:

1.Press R-Link(left softkey) or press to access the PCS Ready Link List.

2.Press Go to (left softkey), highlight the list from which you want

to make a Group call (Co. Groups or Per. Groups), and press .

3.Highlight the group you want to call, and press and hold to place the call and take the floor. (You will see R-Link calling... and Connecting... followed by “You have floor.” Continue with the PCS Ready Link call as described above.)

To display the group members details, press , highlight your desired group member, then press View (left softkey) during step 3 above.

If one of the group members takes the floor, you will see the member’s name and PCS Ready Link number on the display. The phone beeps if you press the Ready Link button when another contact has the floor.

4.When the call is finished, press .

Tip: You can also make a Group Call after checking the group member. Press

to display group members, highlight <Call Group> and press and hold during step 3 above.

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 30