Setting Up Screen Call

This feature enables you to screen incoming calls by using recorded announcements, either one that is pre-recorded or one that you record. You can also record the caller’s message into the Voice Memo list.

To listen to the message, see “Reviewing Voice Memos” on page 128.

Activating Screen Call

To start Screen Call when you have incoming calls:

1.Press to display the options.

2.Highlight Screen Call and press . To set Auto Screen Call:

1.Press to access the main menu.

2.Select Voice Services and press .

3.Select Screen Call and press .

4.Select Auto and press .

5.Select On and press .

6.Set the answering time by using numeric keys or / on the Navigation key.

7.Press or OK (left softkey). (The icon is displayed on the standby display.)

Tip: If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call” are shown with “” or “!” icon in the list (“”: once played, “!”: not played yet).

Tip: While the caller’s message is being recorded: Pressingstops recording

and disconnects the call, pressing answers the call.

Section 2: Understanding Your PCS Phone

2I: Using Your Phone’s Voice Services

130

Page 142
Image 142
Sanyo VM4500 manual Setting Up Screen Call, Activating Screen Call