Sanyo VM4500 manual Answering Calls

Important: To maximize performance when using your PCS Phone, extend the antenna before a call and do not touch the antenna during a call (see page 217).

Correct Incorrect

To place a call with the Flip Closed:

1.Make sure your phone is on.

2.Press and hold the Side Call key () on the right side of the phone. (You will see a message on the Sub LCD.)

3.Follow the system prompts. (The call will be made in speakerphone mode, unless you have a headset attached to the phone.)

Redial to redial the last number you called.

Voice Dial to use the Voice Dial function (see “Using Voice- Activated Dialing” on page 125).

4.When you’re finished, press and hold .

Note: To use a Voice Dial, you must have stored Voice Dial entries (see “Programming Voice Dial Tags” on page 125).

Answering Calls

To answer a call with the Flip Open:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press or to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by

pressing any digit.)

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 16