Sanyo VM4500 manual End-of-Call Options, Saving a Phone Number

End-of-Call Options

To display the following options, press within 10 seconds after disconnecting a call.

To select an option, highlight it and press .

Call Again to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to save the phone number in your Contacts list. Go to Phone Book appears when the number is already in your Contacts list. (See “Saving a Phone Number” on this page.)

Note: The End-of-Call options are not displayed for calls identified as No ID or Restricted.

Saving a Phone Number

Your PCS Phone can store a total of 500 phone numbers in 300 Contacts entries. Each entry can store up to seven phone numbers and the entry’s name can contain 16 characters. Your phone automatically sorts the Contacts entries alphabetically.

To save a number from standby mode:

1.Enter a phone number.

2.Press .

3.Highlight Save Phone# and press .

4.Select a label by highlighting Home, Work, Mobile, Pager, Data,

Fax, or No Label and press .

5.Enter a name and press .

If you have already stored entries in the Contacts list, you are prompted to select the following entry modes:

New Name to enter a name directly.

From Ph. Book to select a name from the Contacts entry list.

6.Press Save (left softkey).

After you have saved the number, the new Contacts entry is displayed. (See “Contacts List Entry Options” on page 90.)

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 23